Manual

Leica TP1020

13. Optional Accessories

Basket holder for second tissue basket (continued)

Installing the second basket holder

• Rotatethecarouselcovercounterclockwiseuntilitcanberemovedfrom

the axle (3) in an upward movement.

The second basket holder is installed at position 2. For this purpose, the

existing cover and bar must be removed.

• Clutchtherod(5) with a pair of tongs and release the slotted screw (8a)

on the upper side of the disc (4).

• Inserttherod(5) of the second basket holder in the bore on the bottom

of the disc (4). Adjust the holding device (6) for the second basket in the

same way as the holding device in position 1 and hold it in that position.

• Putthelockingwasher(7) around the bore in disc (4).

• InserttheAllenscrew(8b) into the bore from above and tighten with an

Allen key no. 3.

• Insertthehub(2) of the carousel cover (1) from above into the axle (3) of

the center piece.

• Tosecureholdontothedisc(4) and rotate the carousel cover clock-

wise.

Fig. 29

8a/8b