Manual

9
Leica TP1020
2. Safety
2.1 Safety notes
These Instructions for Use includes important
information related to the operating safety and
maintenance of the instrument.
The Instructions for Use are an important part of
the product, and must be read carefully prior to
startup and use and must always be kept near
the instrument.
2.2 Warnings
The safety devices installed in this instrument by
the manufacturer only constitute the basis for
accident prevention. Primarily responsible for
accident-free operation is above all the institu-
tion which owns the instrument and, in addition,
This instrument has been built and tested in ac-
cordance with the following safety regulations
on electrical measuring, control, regulating and
laboratory devices.
To maintain this condition and ensure safe
operation, the user must observe all notes and
warnings contained in these Instructions for Use.
the designated personnel who operates, services
or repairs the instrument.
To ensure trouble-free operation of the instru-
ment, make sure to comply with the following
instructions and warnings.
Make sure to comply with the safety instructions and warnings in this chapter.
Make sure to read these instructions, even if you are already familiar with the operation and
use of other Leica products.
For current information about appli-
cable standards, please refer to the CE
declaration for the instrument and to
our Internet site:
www.LeicaBiosystems.com
The protective devices on both instrument and accessories may neither be removed nor modi-
fied. Only authorized and qualified service personnel may repair the instrument and access the
instrument's internal components.
If additional requirements for accident
prevention and environmental protec-
tion exceeding the scope of these In-
structions for Use are imposed by laws/
regulations of the country of operation,
these Instructions for Use must be
supplemented by appropriate instruc-
tions to ensure compliance with such
requirements.