User Manual

Leica DISTO
TM
S910 805080
46
ENWarranty
Warranty under PROTECT by
Leica Geosystems
Lifetime Manufacturer's Warranty
Warranty coverage for the entire usage time
of the product under PROTECT according
to Leica Geosystems International Limited
Warranty and PROTECT General Terms &
Conditions set out under www.leica-geosys-
tems.com/protect. Free of charge repair or
replacement of all products or any parts
under PROTECT that suffer defects as a
result of faults in materials or workmanship.
3 Years No Cost
Additional services should the product under
PROTECT become defective and require
servicing under normal conditions of use, as
described in the user manual, at no additional
charge.
To receive the "3 years No Cost" period, the
product under PROTECT must be regis-
tered at http://myworld.leica-geosys-
tems.com within 8 weeks of the purchase
date. If the product under PROTECT is not
registered, a "2 years No Cost" period
applies.
Garantie unter PROTECT by
Leica Geosystems
Lebenslange Herstellergarantie
Gewährleistungsrechte während der gesa-
mten Nutzungszeit des Produkts unter
PROTECT gemäß Leica Geosystems' Inter-
nationaler Herstellergarantie und den Allge-
meinen Geschäftsbedingungen für
PROTECT, nachzulesen unter www.leica-
geosystems.com/protect. Kostenlose Repa-
ratur oder Austausch aller defekter Produkte
aufgrund von Material- oder Verarbeitungs-
fehlern.
3 Jahre keine Zusatzkosten
Zusätzliche Services, ohne Zusatzkosten,
falls beim Produkt unter normaler Benut-
zung, wie in der Bedienungsanleitung
beschrieben, ein Defekt auftritt und
bestimmte Serviceleistungen notwendig
werden.
Für die "3 Jahre ohne Zusatzkosten" muss das
Produkt auf unserer Website
http://myworld.leica-geosystems.com
binnen acht Wochen nach Kaufdatum regis-
triert werden. Für das nicht registrierte
Produkte unter PROTECT gilt ein Zeitraum
von "2 Jahren ohne Zusatzkosten".
Safety Instructions
The person responsible for the instrument
must ensure that all users understand these
directions and adhere to them.
Areas of responsibility
Responsibilities of the manufacturer
of the original equipment:
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Internet: www.disto.com
The company above is responsible for
supplying the product, including the User
Manual in a completely safe condition.
The company above is not responsible for
third party accessories.
Responsibilities of the person in
charge of the instrument:
• To understand the safety instructions on
the product and the instructions in the
User Manual.
• To be familiar with local safety regulations
relating to accident prevention.
• Always prevent access to the product by
unauthorised personnel.