Users Manual Part 1
18399_001
Fig. 20: Speeding alarm
Panic alarm
Persons wearing the pedestrian tag or using the LED display unit on a machine
can set off a Panic alarm to indicate the need for help. When this alarm is dis-
played on the LED display unit of your machine, the person in distress is
within close proximity to your machine.
18104_001
Fig. 21: Panic alarm with unknown
origin
18105_001
Fig. 22: Panic alarm with known ori-
gin
The display unit performs a self check upon power-up.
•
To indicate an error, all four Status LEDs at the left are permanently on in
red (a). Specic information on the error code is given by the indicators
for tag position and proximity. Refer to the following table.
•
On rst restart after an update, the LEDs might display a "non-fatal" error
for 30 seconds (b).
ab
18059_001
Fig. 23: Indication of errors
a Fatal error or alert
b Non-fatal error
Error codes
LEDs
Subsys-
tem
Severity of
error
Description and possible cause
18289_001
Flash
memory
Non-fatal
error
Display unit is still operable, but data
is lost.
Failure of ash memory.
Fatal error Display unit is inoperable.
Failure of ash memory.
Indication of errors
38 Operation