Users Manual Part 1

LEDs Subsys-
tem
Severity of
error
Description and possible cause
18290_001
Serial
number
Fatal error Invalid serial number.
☞
Contact support.
18291_001
Data port Alert Failed to send data port heartbeat
message.
18292_001
GPS/
GNSS
receiver
Fatal error Unable to communicate with or to
congure GPS/GNSS module.
18293_001
GPS/
GNSS
antenna
Fatal error GPS/GNSS antenna defective or bad
connection.
18294_001
Power
supply
Fatal error Power supply defective or voltage
too low/high.
18295_001
Congur-
ation
Fatal error Conguration le contains errors or
is not present.
18296_001
Firmware Fatal error Firmware is corrupt.
☞
Upload new rmware.
18297_001
Generic Various Generic error. Currently not used -
depends on rmware version.
18298_001
GPIO Fatal error Error in GPIO conguration or hard-
ware problem.
18302_001
Machine
Anchor
Fatal error
•
Communications error; anchors
are inoperable
•
Malfunction of anchors
•
Fault in the system wiring
•
Anchors are disconnected
☞
Inform your dispatcher or
supervisor about the error
and follow their instruc-
tions.
Operation 39