User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Description of the System 15
Software upload
)
Uploading firmware can take some time. Ensure that the battery is at least
75% full before beginning the upload, and do not remove the battery during
the upload process.
Software for Description
All CS models The software is stored in the flash RAM of the CS field
controller.
CS firmware update instructions
• Download the most recent CS firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the CS field controller to your PC. Refer to
"3.1.7 Connecting to a Personal Computer".
• Copy CS firmware file onto a folder on the Leica SD card,
Leica CompactFlash card or USB stick.
• Tap the Loader icon from the desktop, to run the Loader
application.
• Browse to the directory into which you copied CS
firmware file, select it and start the upload.
• A message will appear when the upload is complete.
)
Ensure that a Leica SD card or a Leica CF card is
inserted into the CS field controller before starting
the upload.