User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
16
CS10/CS15, Description of the System
GS05/GS06 The software is stored in the flash RAM of the GS05/GS06.
GS firmware update instructions
• Download the most recent GS firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the CS field controller to your PC. Refer to
"3.1.7 Connecting to a Personal Computer".
• Copy GS firmware file into the /SYSTEM directory of the
Leica SD card or Leica CompactFlash card.
• Connect the GS05/GS06 to the CS field controller. Refer
to "3.1.5 Setting up as Handheld GNSS".
• Establish a connection between the GS05/GS06 and the
CS field controller. Refer to the Leica Viva TechRef
(Instrument connections - GPS connection wizard).
• Start the upload. Refer to the Leica Viva GNSS Getting
Started Guide (Appendix B Uploading System Files).
• A message will appear when the upload is complete.
Software for Description