User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Description of the System 17
GS08/GS12 The software is stored in the flash RAM of the GS08/GS12.
ME firmware update instructions
• Download the most recent ME firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the CS field controller to your PC. Refer to
"3.1.7 Connecting to a Personal Computer".
• Copy ME firmware file into the /SYSTEM directory of the
Leica SD card or Leica CompactFlash card.
• Connect the GS08/GS12 with the GEV234/GEV237 cable
to the CS field controller and establish a connection
between the GS08/GS12 and the CS field controller.
Refer to the Leica Viva TechRef (Instrument connections
- GPS connection wizard).
• Start the upload. Refer to the Leica Viva GNSS Getting
Started Guide (Appendix B Uploading System Files).
• A message will appear when the upload is complete.
Software for Description