User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Operation 37
3.1.3 Fixing the Slot Cover to the CS
Fixing the slot
cover to the CS
step-by-step
Step Description
1. Press the screwdriver end of the supplied stylus on the quarter-turn screws
and loosen them.
2. Remove the slot cover.
)
Reattach the slot cover with the stylus, making sure the quarter-turn
screws are seated.
2
1
CS_016