User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Operation 47
Connect to PC via
USB cable step-by-
step
Step Description
1. Start the PC.
2. Plug the GEV234 cable into CS field controller.
)
For CS field controllers with DSUB9 connector, the GEV223 cable
has to be used.
3. Turn the CS field controller on.
4. Plug the GEV234 cable into the USB port of the PC.
For PCs with Windows XP operating system:
)
ActiveSync starts up automatically. If does not start automatically,
start ActiveSync. If not already installed, run the ActiveSync instal-
lation program.
CS_026
2
3
4