User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Operation 49
3.2 Power Functions
Turning CS field
controller on
Press and hold power key ( ) for 2 s.
)
CS field controller must have a power supply.
Turning CS field
controller off
Press and hold power key ( ) for 5 s.
)
CS field controller must be on.
Putting CS field
controller into
stand-by
Press and hold power key ( ) < 2 s.
)
CS field controller must be on.
Power Options
menu
Press and hold power key ( ) for 2 s to open Power Options menu.
)
CS field controller must be on.
Option Description
Turn off Turn CS field controller off.
Stand-by Put CS field controller into stand-by mode.
)
In stand-by mode, CS field controller shuts
down and reduces power consumption.
Rebooting from stand-by mode is quicker
than a cold start after turning off.