User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Operation 55
3.3.3 Charging the Battery
Charge battery
step-by-step
Step Description
1. Connect the GEV235 power adapter or GDC221 car adapter with the CS
field controller (A) or the docking station (B) and an A/C plug.
2. The power LED on the CS field controller switches on. When CS field
controller’s battery is fully charged the LED switches off again.
)
Refer to "LED indicators" for information about the power LED.
AB
CS_024