User's Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Description of the System
- 2 User Interface
- 3 Operation
- 4 Care and Transport
- 5 Safety Directions
- 6 Technical Data
- 7 International Limited Warranty, Software Licence Agreement
- Appendix A Pin Assignments and Sockets
- Index
CS10/CS15, Operation 59
Insert and remove
an SD card step-by-
step
Step Description
)
The SD card is inserted into a slot inside the top of the CS10/CS15.
1. Refer to "Fixing the slot cover to the CS step-by-step". Loosen the screws
inside the slot cover on top of the CS10/CS15 using the screwdriver end of
the stylus.
2. Detach the slot cover from the CS10/CS15.
3. Slide the card firmly into the slot until it clicks into position.
)
Do not force the card into the slot.
4. The card must be held with the contacts facing the slot.
CS_018
1
2
4
SD
CF
3