User Manual

CS20, Operation
26
4.1.6 Setting up for Usage of Long Range Bluetooth Expansion Pack CTR20
Attaching the
CTR20 Step-by-step
This section does only apply to the models CS20 3.75G, CS20 3.75G DISTO and
CS20 CDMA DISTO.
)
The CTR20 is not available in EU countries due to the directions of
EN 300 328 V.1.8.1!
)
When the expansion cover or expansion pack are detached from the field
controller, the IP68 protection does not apply! Look for a dry and dust free
atmosphere when detaching the expansion cover or the expansion pack.
2. Push the slide fastener of the battery compartment in the direction of the
arrow with the open-lock symbol.
Remove the cover from the battery compartment.
3. Remove the battery from the battery compartment.
4. Bend up the flap that covers the SIM card holder.
5. Push the SIM card holder in the direction of the OPEN arrow and flip it up.
6. Place the SIM card into the SIM card holder, the chip facing the connectors
inside the slot - as shown beside the SIM card holder.
7. Press the SIM card holder down and push the SIM card holder in the direction
of the LOCK arrow to close.
8. Bend down the flap again and reinsert the battery.
9. Attach the cover of the battery compartment. Push the slide fastener of the
battery compartment in the direction of the arrow with the closed-lock
symbol.
Description
Step Description
1. Loosen the screws of the expansion cover and detach the cover from the field
controller.
1b
1a
3
2b
2a
4
008507_001