User Manual

CS20, Operation
30
4.2 Batteries
4.2.1 Operating Principles
First-time use /
Charging batteries
The battery must be charged prior to using it for the first time.
The permissible temperature range for charging is between 0°C to +40°C/ +32°F to
+104°F. For optimal charging, we recommend charging the batteries at a low
ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm during charging. Using the chargers
recommended by Leica Geosystems, it is not possible to charge the battery if the
temperature is too high.
For Li-Ion batteries, a single refreshing cycle is sufficient. We recommend carrying
out a refreshing cycle when the battery capacity indicated on the charger or on a
Leica Geosystems product deviates significantly from the actual battery capacity
available.
Operation /
Discharging
The batteries can be operated from -30°C to +60°C/-22°F to +140°F.
Low operating temperatures reduce the capacity that can be drawn; high operating
temperatures reduce the service life of the battery.
4.2.2 Changing the Battery
Insert and remove
the battery step-by-
step
Step Description
)
Turn over the field controller.
1. Push the slide fastener in the direction of the arrow with the open-lock
symbol.
2. Remove the cover from the battery compartment.
)
Ensure that no water enters the battery compartment. IP68 applies
only with the battery compartment closed.
3. Pull the battery from the battery compartment.
4. Place the battery into the battery compartment with the arrow facing to the
top.
5. Attach the cover of the battery compartment. Push the slide fastener of the
battery compartment in the direction of the arrow with the closed-lock
symbol.
2
3
4a
4b
5a