User's Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Equipment Setup
- 4.1.1 Setting up as a Post-Processing Base
- 4.1.2 Fixing the Field Controller to a Holder and Pole
- 4.1.3 Fixing a Hand Strap to the CS
- 4.1.4 Fixing the Utility Hook to the CS
- 4.1.5 Replacing the Display Foil on the CS
- 4.1.6 Inserting and Removing a SIM Card
- 4.1.7 Setting Up for Remote Control or RTK using an Expansion Pack
- 4.1.8 Connecting to a Personal Computer
- 4.1.9 Enabling WLAN in Windows EC7
- 4.2 Batteries
- 4.3 Power Functions
- 4.4 Working with the Memory Device
- 4.5 Using the Digital Camera
- 4.6 Using the Camera Flash Light as Torch
- 4.1 Equipment Setup
- 5 Care and Transport
- 6 Technical Data
- 7 Software Licence Agreement
- Appendix A Pin Assignments and Sockets
Software for Description
ME firmware update instructions
•
G
o to www.myworld.leica-geosys-
tems.com and log in.
•
Go to myProducts and select your prod-
uct.
☞
If your product is not in the list,
click Add Product.
•
C
lick the Software tab and download
the software to your computer.
•
Unzip the file and store the required files
in the \SYSTEM directory of the data stor-
age device.
•
Insert the data storage device into the
connected field controller an turn it on.
•
Captivate: Go to Settings\Tools\Update
software.
•
File to load: Select the firmware to
upload.
•
Click OK. The software is uploaded to
your product.
CGR4 The software is stored in the UHF radio mod-
ule in the CG
R module.
CGR UHF radio firmware update instruc-
tions
•
Download the most recent CS20 firm-
ware file from
https://myworld.leica-geosystems.com.
•
Copy the CS20 firmware file into the
\SYSTEM directory of the Leica SD card.
•
Connect the CGR radio to the CS field
controller and configure the CGR radio as
RTK device. Refer to the Leica Captivate
Technical Reference Manual.
•
Select the firmware file to upload and
start the update process. A message will
appear when the upload is complete.
2.3.2 Power Concept
Use the batteries, chargers and accessories recommended by Leica Geosystems
t
o ensure the correct functionality of the instrument.
Model Power supply
All CS models Internally by GEB331 battery, OR
Externally by GEV276 cable, OR
Externally by GEV219 cable
If an external power supply is connected and the internal
ba
ttery is inserted, then the external power is used. The
internal battery is charged.
Please note: Charging functionality is not available for CS20
field controller.
General
Power options
Description of the System 21