User's Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Equipment Setup
- 4.1.1 Setting up as a Post-Processing Base
- 4.1.2 Fixing the Field Controller to a Holder and Pole
- 4.1.3 Fixing a Hand Strap to the CS
- 4.1.4 Fixing the Utility Hook to the CS
- 4.1.5 Replacing the Display Foil on the CS
- 4.1.6 Inserting and Removing a SIM Card
- 4.1.7 Setting Up for Remote Control or RTK using an Expansion Pack
- 4.1.8 Connecting to a Personal Computer
- 4.1.9 Enabling WLAN in Windows EC7
- 4.2 Batteries
- 4.3 Power Functions
- 4.4 Working with the Memory Device
- 4.5 Using the Digital Camera
- 4.6 Using the Camera Flash Light as Torch
- 4.1 Equipment Setup
- 5 Care and Transport
- 6 Technical Data
- 7 Software Licence Agreement
- Appendix A Pin Assignments and Sockets
3. While in this position, lift the top of the field controller from the
holder
.
2
3
1
008551_001
4.1.3 Fixing a Hand Strap to the CS
8501_002
2b
1
3
2a
☞
Turn over the field controller.
1. Take the end of the hand strap and clip it to the socket at the bot-
t
om of the field controller.
2. Place the screw of the main hook into the thread at the top of the
field controller and fasten it.
3. Adjust the length of the hand strap.
4.1.4 Fixing the Utility Hook to the CS
8498_002
1b
1a
Fixing the hand strap
(G
HT67) step-by-step
Fixing the utility hook
(G
HT68) step-by-step
Operation 35