User's Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Equipment Setup
- 4.1.1 Setting up as a Post-Processing Base
- 4.1.2 Fixing the Field Controller to a Holder and Pole
- 4.1.3 Fixing a Hand Strap to the CS
- 4.1.4 Fixing the Utility Hook to the CS
- 4.1.5 Replacing the Display Foil on the CS
- 4.1.6 Inserting and Removing a SIM Card
- 4.1.7 Setting Up for Remote Control or RTK using an Expansion Pack
- 4.1.8 Connecting to a Personal Computer
- 4.1.9 Enabling WLAN in Windows EC7
- 4.2 Batteries
- 4.3 Power Functions
- 4.4 Working with the Memory Device
- 4.5 Using the Digital Camera
- 4.6 Using the Camera Flash Light as Torch
- 4.1 Equipment Setup
- 5 Care and Transport
- 6 Technical Data
- 7 Software Licence Agreement
- Appendix A Pin Assignments and Sockets
Press and hold power key ( ) for 5 s.
☞
The field controller must be on.
Press and hold power key ( ) for 2 s to open P
ower Down Options menu.
☞
The field controller must be on.
Option Description
Power down and turn off To turn the field controller off.
Put into stand-by To put the field controller into stand-by
mo
de.
Reset hardware Perform one of the following options:
•
Restart hardwareThe device powers
down and restarts.
•
Reset Windows EC7The device powers
down and restarts. Any Bluetooth pair-
ings are deleted.
•
Reset Leica CaptivateThe device pow-
ers down and restarts. All working styles,
dial-up lists and server lists are deleted.
Jobs, code lists, coordinate systems etc.
are not deleted.
•
Reset Windows EC7 and Leica Capti-
vateThe device powers down and
restarts. Bluetooth pairings, working
styles, dial-up lists and server lists are
deleted.
To turn on the instrument press and hold the ON/OFF button for 2 s.
To turn off the instrument press and hold the ON/OFF button for 2 s.
4.4 Working with the Memory Device
4.4.1 Working with the SD Card
•
K
eep the card dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage t
o the card.
Turning field
con
troller off
Menu “Power Down
Options”
Turn on GS07
Turn off GS07
☞
☞
44 Operation