User's Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Equipment Setup
- 4.1.1 Setting up as a Post-Processing Base
- 4.1.2 Fixing the Field Controller to a Holder and Pole
- 4.1.3 Fixing a Hand Strap to the CS
- 4.1.4 Fixing the Utility Hook to the CS
- 4.1.5 Replacing the Display Foil on the CS
- 4.1.6 Inserting and Removing a SIM Card
- 4.1.7 Setting Up for Remote Control or RTK using an Expansion Pack
- 4.1.8 Connecting to a Personal Computer
- 4.1.9 Enabling WLAN in Windows EC7
- 4.2 Batteries
- 4.3 Power Functions
- 4.4 Working with the Memory Device
- 4.5 Using the Digital Camera
- 4.6 Using the Camera Flash Light as Torch
- 4.1 Equipment Setup
- 5 Care and Transport
- 6 Technical Data
- 7 Software Licence Agreement
- Appendix A Pin Assignments and Sockets
2. Insert the USB stick into the USB A host port.
4.5 Using the Digital Camera
The field controller is equipped with a digital camera and a flash light, both
lo
cated at the underside. Mounting a hand strap or pole holder plate does not
limit the camera view.
You can start the camera application from within Leica Captivate.
☞
To be able to start the camera application, Leica Captivate has to be
o
pen.
1. Press the Camera key
.
T
he screen Capture Image is displayed.
2. Aim the camera to the desired target.
3. Check the view at the display.
4. Press the OK key or click Capture to take a picture.
The picture is displayed in the Image Viewer.
☞
Capture changes to Store.
5. Press OK again or click Store to store the picture.
An info screen is displayed where you can choose to save the picture
with a link to a point, line or area.
6. Press F2 or F3 to store the picture with a link. Follow the instructions
on the screen.
Press F4 to store the picture without a link.
Press F6 to return to the Image Viewer without storing the picture.
After storing the picture, the Capture Image screen is displayed
again.
4.6 Using the Camera Flash Light as Torch
You can use the flash light of the camera as torch.
T
o put the flash light on/off, hold
and press .
Overview
Taking a picture step-
by-s
tep
Using the flash light
as torch
46 Operation