Leica DISTO™ with Bluetooth Smart usage on Android 4.3 or higher V 1.
Content Leica DISTO™ devices Bluetooth compatibility Leica DISTO™ Bluetooth Smart Leica DISTO™ sketch for Android 2
The Leica DISTO™ devices with Bluetooth® Leica DISTO™ D110 Bluetooth® Smart Leica DISTO™ D3a BT (D330i) Bluetooth® 2.1 Leica DISTO™ D8 Bluetooth® 2.1 Leica DISTO™ D510 Bluetooth® Smart Leica DISTO™ D810 touch Bluetooth® Smart Requires Bluetooth® 4.0 Requires SPP support Requires SPP support Requires Bluetooth® 4.0 Requires Bluetooth® 4.
Overview DISTO™ compatibility Leica DISTO™ D110 Windows 7 Windows 8.1 Windows Mobile 6.5 Android 2.3.3 - Leica DISTO™ transfer - - Android 4.3 iOS Leica DISTO™ transfer Leica DISTO™ sketch BLE Bluetooth® 4.0 Leica DISTO™ sketch www.disto.
Prolog This presentation should provide further advice on how to use the Leica DISTO™ with Bluetooth® Smart. Also the corresponding Apps for Android are described in this document.
Leica DISTO™ Bluetooth Smart Getting started
General Bluetooth® Smart Bluetooth® Smart is compatible with Bluetooth® 4.
Leica DISTO™ D110 Bluetooth® Smart The Bluetooth® can be switched off and on at the Leica DISTO™ D110 The Leica DISTO™ D110 only supports the connection to iOS or Android 4.3 Apps Press for 2 sec.
Leica DISTO™ D510 Bluetooth® Smart The Bluetooth® can be switched off in the Settings of the Leica DISTO™ D510 The Leica DISTO™ D510 only supports the connection to iOS or Android 4.
Leica DISTO™ D810 touch Bluetooth® Smart 10 The Bluetooth® can be switched off in the Settings of the Leica DISTO™ D810 touch
Leica DISTO™ D810 touch Bluetooth® Smart The Leica DISTO™ D810 touch provides 3 different modes for use with Bluetooth® Keyboard Spreadsheet – Mode Go to Bluetooth® Settings E.g. 7.123 decimal numbers Keyboard Text – Mode E.g. 7.123m 2‘2“13/32 TAB: sends a Tabulator after each value Enter: sends a Enter after each value none: only value will be sent 0.
Leica DISTO™ sketch Android 4.
Leica DISTO™ sketch for Android 4.3 or higher Start App When using with Leica DISTO™ D810 touch we are recommending to use the App mode for Bluetooth® When using with Leica DISTO™ D810 touch it is required to set the Leica DISTO™ device Bluetooth® to unencrypted mode first. Otherwise the device will connect but it will not transfer measurement values! This is not required for the Leica DISTO™ D510 or D110.
Leica DISTO™ sketch for Android 4.
Leica DISTO™ sketch for Android 4.
Leica DISTO™ sketch for Android 4.
Leica DISTO™ sketch for Android 4.3 or higher Create new sketch Enter new name if required 2. 1. 3.
Leica DISTO™ sketch for Android 4.
Leica DISTO™ sketch for Android 4.3 or higher Create new sketch with photo 2. 3. 1.
Leica DISTO™ sketch for Android 4.3 or higher Good to know The Leica DISTO™ device only sends the currently measured value. To send a result from the main line of the DISTO™ press the „=„ key on the D810 touch or D510. For the D110 press the Bluetooth® key to send a result from the main line. Press short to send the measurement value from the main line of the display (e.g. area) To send a value using a D3a BT or D8 with Bluetooth® 2.
Leica DISTO™ transfer Android 4.
Leica DISTO™ transfer for Android 4.3 or higher Start App When using with Leica DISTO™ D810 touch we are recommending to use the App mode for Bluetooth® When using with Leica DISTO™ D810 touch it is required to set the Leica DISTO™ device Bluetooth® to unencrypted mode first. Otherwise the device will connect but it will not transfer measurement values! This is not required for the Leica DISTO™ D510 or D110. 22 This App works with Leica DISTO™ D3a BT (D330i), D8, D110, D510 and D810 touch.
Leica DISTO™ transfer for Android 4.
Leica DISTO™ transfer for Android 4.3 or higher Transfer layout Overview Switch Laser of DISTO™ on/off *) Start Distance Measurement on DISTO™ *) Start Distance and Tilt Measurement on DISTO™ *) Shows location of File *) Not possible for DISTO™ D510 Text field for entering numbers or formulas Enabling confirmation Beep Enabling start screen Enable to search Excel files only Disable to search with file manager Enable to get data with units (e.g.