User's Manual

5-13GPS1200
Reference Station
Configure a
modem interface
step-by-step
In order to use a modem for the remote interface connection, the corresponding
device has to be created on the receiver and attached to the receiver serial port. As
an example, the following step-by-step description shows how to configure a U.S.
Robotics 56k modem for port P1 on the receiver. Refer to the GPS Technical Refer-
ence Manual for more information. Refer to the manual of the modem for information
on the modem configuration.
Step Description
1. Main Menu: Config...\Interfaces...
2. CONFIGURE Interfaces
Highlight Remote.
3. EDIT (F3) to access CONFIGURE Remote Interfaces.
4. Highlight 1.
5. USE (F6) to use port P1 by remote.
6. DEVCE (F5) to access CONFIGURE Devices.
7. PAGE (F6) changes to the Modem page.