User's Manual

Reference Station GPS1200 5-16
7. DEVCE (F5) to access CONFIGURE Devices.
8. PAGE (F6) changes to the Ethernet page.
9. CTRL (F4) to configure the NET port numbers and access control.
10. CONFIGURE Set NET Port
CONT (F1) to accept settings and return to CONFIGURE Devices.
11. CONT (F1) to return to CONFIGURE Remote Interfaces.
12. Highlight NETX.
13. USE (F6) to use the port NET by remote.
14. Press CONT (F1) three times to return to ...
15. STORE (F1) to ...
)
The receiver is ready to accept an incoming call from a remote application.
16. Connect the receiver port NET to a LAN using a suitable network cable.
Step Description