User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
108
iCON gps 60, Technical Data
Recording Data (Leica GNSS raw data and RINEX data) can be recorded on the internal memory.
Power
Internal battery
Capacity [MB] Data capacity
• 466 466 MB is typically sufficient for about
GPS only (12 satellites)
• 3600 h L1 + L2 + L5 data logging at 15 s rate
• 14000 h L1 + L2 + L5 data logging at 60 s rate
GPS + GLONASS (12/8 satellites)
• 3100 h data logging at 15 s rate
• 12300 h data logging at 60 s rate
GPS + GLONASS + Galileo (12/8/10 satellites)
• 1400 h data logging at 15 s rate
• 5800 h data logging at 60 s rate
Power consumption: iCON gps 60, radio excluded: 6 W typically, 500 mA
External supply voltage: Nominal 12 V DC ( , GEV71 car battery cable to a 12 V
car battery), voltage range 9 V-28 V DC
Type: Li-Ion
Voltage: 7.4 V
Capacity: GEB221: 4.4 Ah