User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
32
iCON gps 60, Using the iCON gps 60 SmartAntenna
Determining the
antenna height
with the GRT146
carrier
step-by-step
Step Description
1. Measure a height from the pillar benchmark to a surface on the carrier.
2. Use the appropriate measurement from the diagram above. Determine the
height difference between the measured surface on the carrier and where
the MRP of the antenna sits on the carrier.
3. The vertical height reading = adding the values in step 1. and step 2.
GS_036
36.5 mm
145.5 mm
109 mm