User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
34
iCON gps 60, Using the iCON gps 60 SmartAntenna
Determining the
antenna height
with the height
hook step-by-step
2.7 Measuring the Antenna Height for a Pole Setup
Measuring the
antenna height -
pole setup
Step Description
1. The vertical height reading = vertical height reading from the height hook.
• The vertical height reading is the height difference between the
ground mark and the bottom end of the height hook.
• The vertical offset of 0.36 m is automatically stored in the antenna
setup record for a tripod setup and will automatically be taken into
account. It does not need to be entered.
Setup Type Antenna type The required measurement
Pole iCON gps 60 Pole • vertical height reading of the pole.