User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
62
iCON gps 60, Software Tools
When using BasePilot, always check in the Position submenu that the Smar-
tAntenna has selected the correct base point! Using the wrong base point
can lead to an error of more than 20 m for a rover!
Function: Find
Nearest
step-by-step
The Find Nearest function searches through the Base Point List for base points in
the vicinity.
7. Press right navigation key to continue with the Communication setup
screen e.g. to establish a connection via radio.
8. In case the existing point has been chosen, either the saved setup can be
chosen OR the current setup.
Step Description
Step Description
1. Position the iCON gps 60 where the base point should be set up.
2.
Select Modify and press key.
3.
Select Find Nearest and confirm selection with key.