User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
iCON gps 60, Software Tools 65
4.1.2 Raw Data Logging
Raw Data logging To log RINEX data the instrument must be configured for Raw Data logging. The
settings are accessible via Settings>Tools>Raw Data logging.
RINEX is used for post processing when high accurate coodinates are
required.
Import / Export of
data
Import and export of data can be performed via the Settings>Tools>Import/
Export of data menu with a USB flash drive as external storage device.
Import options from a USB flash drive to the instrument:
Import from USB Description
Base Point List imports a list of base points
Antenna List imports a list of external antennas
Welcome Screen imports a customisable welcome screen
(e.g. a company logo)
System Configuration overwrites the current system configura-
tion (e.g. with a configuration backup
from a file)