User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
iCON gps 60, Setups with Controller and Accessories 69
Real-time refer-
ence setup
step-by-step
a) Radio antenna
b) iCON gps 60 antenna
c) GAD108
d) Height hook
e) GRT146
f) Tribrach
g) Tripod
h) CC50 field controller
i) Battery for CC50 field controller
j) USB flash drive
k) Mini-USB to USB cable
l) CC60/CC61 field controller
m) Battery for CC60/CC61 field
controller
n) GEB171 external battery
o) GEV219 power cable
Step Description
1. Setting Up the Equipment
• Set up the tripod, mount and level the tribrach onto the tripod.
• Check that the tribrach is correctly centred over the marker.
• Place and lock the carrier into the tribrach.
• Screw the iCON gps 60 antenna onto the carrier.
• Check that the tribrach is still correctly positioned and levelled.
• Hang the external battery onto a tripod leg.
• Take the GEV219.
• Attach the 8 pin plug connector to the iCON gps 60 antenna.