User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
iCON gps 60, Setups with Controller and Accessories 73
• Check that the tribrach is still correctly positioned and levelled.
• Mount the GHT36 on the 2nd tripod. Attach the telescopic rod and the
GAD34 arm.
• Screw the radio antenna onto the GAD34 arm.
Step Description
2. Setting Up the iCON gps 60:
• Place the iCON gps 60 SmartAntenna e.g. in a container.
• Attach the QN/TNC adapter to the QN port.
• Connect the TNC cable to the QN/TNC adapter of the SmartAntenna
and the GAD34 at the radio antenna.
• Connect a second TNC cable to the SmartAntenna and the MNA1202
GG antenna.
Step Description