User Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 Unpacking the Container
- 2 Using the iCON gps 60 SmartAntenna
- 3 Leica iCON gps 60 User Interface
- 4 Software Tools
- 5 Setups with Controller and Accessories
- 6 Care and Transport
- 7 Safety Directions
- 8 Technical Data
- 9 International Limited Warranty, Software Licence Agreement
- Index
80
iCON gps 60, Setups with Controller and Accessories
5.5 Real-Time Rover Setup
Use The following equipment setups are to be used for real-time rover with extended
periods of use in the field.
• Attach the connector with the
5 pin plug to the external
battery.
• Turn on the antenna.
2. Configuring the Raw Data Logging
• Refer to "Raw Data logging".
Step Description