User manual

MAIN MENU SUBMENU
Leica E Series Manual 56

The "COLOR" function makes it possible to adapt the camera chip
to the ambient light so that color-neutral images can be acquired.
Adjusting the white balance manually (recommended)
1. Move the specimen out of the eld of view so that only the illumina-
tion is seen.
2. Press the ▤ button on the remote control.
3. Call up the "COLOR" entry.
4. Select the "SET WHITE BAL" menu item and press the "OK" button.
4. If necessary, correct the values for "RED" and "BLUE" until the image
shows a uniform gray area.
5. Press the ▤ button to exit the menu.
SET WHITE BAL
WB MODE
RED LEVEL
BLUE LEVEL
BLACK LEVEL
COLOR
EXPOSURE
RESOLUTION
SETUP CAMERA
SETUP USER
MANUAL
PRESS OK
COLOR (Manual White Balance)