User manual

Leica E Series Manual 59
Main menu Submenu

The camera settings enable you to control internal parameters such
as the date or time or to reset the camera. You can also switch the
camera from HD mode to PC mode (or vice versa).
SET DATE TIME
This command sets the date and time as well as the format for display-
ing them. The following formats are available for selection: YYMMDD –
DDMMYY – MMDDYY.
RESET CAMERA
This command resets the camera to the factory settings. All user informa-
tion (such as white balance, resolution etc.) is reset.
FLIP IMAGE
Rotates the live image by 180°.
Overlay
Shows the following on the HD monitor, superimposed over the live
image: Leica logo, histogram, date/time and image counter.
CAMERA MODE
This allows you to toggle the camera between PC and HD mode. You can
also toggle between PC and HD mode by pressing the black button for
more than 5 sec until a message appears on the screen.
SET DATE TIME
RESET CAMERA PRESS OK
PRESS OK
FLIP IMAGE 0°
OVERLAY NONE
CAM MODE PC-MODE
COLOR
EXPOSURE
RESOLUTION
SETUP CAMERA
SETUP USER
SETUP CAMERA (Camera Settings)