Manual

This assembly sheet does not replace the complete manual
on provided CD (i.e. LED illumination installation).
Note: For safety reasons, it is highly recommend that two
people assemble the column to the base plate. One person
should hold the base plate securely on a non-skid surface,
while the second person attaches the column to the base.
Insert horizontal arm into the cross joint
observing the flattening of the arm and
orientation of joint according to image.
Tighten allen screw connecting column
to base. Attention: washer must be
placed between base and column.
Take out parts from boxes. Place base
plate on non skidding surface.
Mount the safety clamp to the column.
One box contains horizontal arm, cross
joint, safety clamp & tools
Allen key, washer and allen screwOne box contains the base plate.
... and immediately secure the
instrument with previously removed
washer and screw.
If necessary connect base plate to
grounding cable with suitable plug.
Mount the Leica A60 to the horizontal
arm from below...
Place the cross joint on top of the
safety clamp on the column and lock
arm with referring knob.
Remove allen screw and washer from
the Leica A60 instrument as shown.
Leica A60 S – Assembly Sheet