User Guide

EN
212
Click wheel and top dial operation during recording mode
In the four exposure control modes, the click wheel and the top
dial operate as follows:
Automatic
program mode
(see p.216)
Aperture
priority mode
(see p.217)
Shutter speed
priority mode
(see p.217)
Manual mode
(see p.221)
Click
wheel
Changes the
automatically
preset shutter
speed/aperture
combinations
(Program shift,
see p.216)
Changes the
aperture
No function
1
Changes the
aperture
Top dial
No function
1
No function
1
Changes the
shutter speed
Changes the
shutter speed
Operation of both the click wheel and the top dial can be
customized in two ways:
– their default setting directions can be reversed, and
– their setting steps can be adjusted.
1
Direct entry of exposure compensation at factory setting (On) of Direct Exp. Control
(see p. 220).
Setting the function
1. In the menu's SETUP section, select Customize Control,
2. in the sub-menu, Rear Wheel Direction or
Front Wheel Direction, and
3. select the desired function in the sub-menu.
4. Front Wheel Direction
Stop Down →: Turning clockwise increases the shutter speed,
turning counterclockwise decreases it.
← Stop Down: Turning clockwise decreases the shutter speed,
turning counterclockwise increases it.
5. Rear Wheel Direction
Stop Down →: Turning right decreases the aperture (higher values),
turning left increases it (lower values).
← Stop Down: Turning right increases the aperture (lower values),
turning left decreases it (higher values).
Note:
These settings have no effect on the click wheel's operation during
menu control. They have no effect whatsoever when
Auto ISO Settings in menu's SETUP section is set to On.
Photo recording mode