User Manual

EN
13
Preparations
CHANGING THE FOCUSING SCREEN
The Leica S allows the focusing screen to be changed (see also "System
accessories / Interchangeable focusing screens". As standard the cam-
era is supplied with a completely matt screen.
The other focusing screens are delivered individually in a case with twee-
zers and a dust brush.
To change the screen
1. Remove the lens, and
B
A
2. Release the screen frame A from its engaged position by pressing the
tab
B with the tip of the tweezers.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. The frame with the focusing screen then opens downwards.
C
3. Then grip the focusing screen C at the small tab using the tweezers,
tilt it forwards slightly and remove.
4. Then place the screen temporarily into the side compartment of the
case.
5. Grip the screen to be installed with the tweezers at its tab, place into
the frame and
6. press the frame upwards into its engaged position with the tip of the
tweezers.
Important:
Proceed exactly as described above when changing the screen. Take
particular care to protect the delicate surfaces of the focusing screens
from scratches.
Inhalt_EN.indd 13 12.10.2015 09:34:09