User Manual

EN
45
Recording mode
Sound recording
The sound can be recorded using the integral microphones or with exter-
nal microphones connected using the LEMO
®
audio adapter supplied.
The integral microphones record in stereo.
Note:
The automatic distance setting (autofocus) generates noises that are also
recorded.
Setting the audio recording level is possible automatically or manually
before or during the recording.
1. In the menu, under
IMAGE, select the item Video Settings,
2. select
Audio Level in the sub-menu, and
3. set the desired function there
Manual setting
1. Hold the depth of fi eld preview/function button depressed, and
2. press the Joystick to the left (= decrease level) or right (= increase
level)
The level should be set so that input override is avoided, i.e. such that the
'bars' do not or only seldom change from white to red (at the far right end
of the scale).
21
3
4
1 Microphone ( = Automatic recording level control, = Manual
recording level control,
= No sound recording)
2 Setting mark
3 Left channel level
4 Right channel level
Note:
The level is not controlled separately for each channel.
Deactivate sound recording
Move the setting mark completely to the left until the microphone symbol
changes from
Move the setting mark completely to the left until the microphone symbol
to
To reduce any noise caused by wind during sound recording, a damping
function is available.
1. In the menu, under
IMAGE, select the item Video Settings,
2. select
Audio Wind Elimination in the sub-menu, and
3. activate or deactivate the function there
Note:
When no wind noise is to be feared, you should always select
Off to
ensure optimum sound.
Checking the sound recording
You can check your recording level even during the recording using
connected headphones.
1. Connect the headphones to the camera via the LEMO
®
audio jack
using the audio adapter S (supplied)
• The corresponding display appears in the monitor image
1
2
1 Symbol for connected headphones
2 Volume bar
Setting headphone volume
2. Hold the depth of fi eld preview/function button depressed, and
3. press the Joystick down (= reduce volume) or up (= increase volume)
Inhalt_EN.indd 45 12.10.2015 09:34:19