User Manual

238

Wi-Fi/Bluetooth

Controlling the Camera with a Smartphone

Using the smartphone to operate the camera’s shutter via a Bluetooth

connection only

Wireless connectivity required:

Bluetooth

Make a Bluetooth connection to the smartphone (→228)

Operate the smartphone

Select [ ]

Select [Shutter Remote Control]

Take the pictures

• [Shutter Remote Control] is available only when the camera’s main switch is set to [ON].

• The Live View screen of the camera cannot be viewed on a smartphone.

• When the camera turns off after [Sleep Mode] is activated during recording, select [Shutter

Remote Control] again using the smartphone to turn on the camera once more. (This function

is enabled only when [Remote Wakeup] is set to [ON] and [Auto Transfer] is set to [OFF].)

[B] (Bulb) (Approximately up to 120 seconds)

You can perform [B] (Bulb) recording when the shutter speed is set to [T]

(time) in Manual Exposure Mode.

This function is useful when you take pictures of stars in the night sky or a

night scene, since the shutter can be kept open even for longer exposures.

Operate the smartphone

Press [ ] to start recording (Press and hold [ ])

Release your finger from [ ] to end recording

• Slide [ ] in the direction of LOCK to record with the shutter button fixed in the fully pressed

condition. (Slide [

] back in the opposite direction or press the shutter button of the camera to end

recording.)

• If Bluetooth is disconnected during the [B] (Bulb) recording, reconnect Bluetooth and perform the

operation to end recording using the smartphone.

• “[T] (time)” will be displayed on the camera screen.