LEICA M10-P QUICK START GUIDE Download the full scope instruction manual here: https://en.leica-camera.com/Service-Support/Support/Downloads Please register via the following link if you would like to receive a printed copy of the full scope instruction manual: www.order-instructions.leica-camera.
4 4a 6 13 5 3a 3 12 2 11 1 14 10 5 7 9 15 16 17 18 8 20 19 21 30 24 23 26 27 22
TOP VIEW 6 1 Main switch Switching the camera ON/OFF 2 Shutter button – Tap: activates exposure metering and control – Press down fully: the picture is taken – In standby mode: The camera is reactivated 3 4 Shutter speed setting wheel with stop positions – A: Automatic shutter speed control – 8s - 4000: Shutter speeds (inc.
20 Viewfinder eyepiece 27 Memory card slot 21 LCD panel 22 Directional pad – for menu navigation – for menu item/function selection – for scrolling through the picture memory 23 Center button – to access the status display – to apply menu settings – to display settings/data during exposure – for display of picture data during picture review 28 Battery compartment 24 Thumbwheel – for menu navigation – for menu item/function selection – for exposure compensation value selection – for enlarging/reducing
DISPLAYS IN THE VIEWFINDER DISPLAYS ON THE LCD PANEL The bright-line frame rangefinder of this camera is not just particularly bright viewfinder – it also doubles as a lens-coupled rangefinder. All Leica M lenses with focal lengths between 16 and 135 mm are coupled automatically.
GESTURE CONTROL 1/8000 ISO 12500 EV Tap briefly horizontal/vertical999-9000 Two-finger swipe pinch/spread Tap twice PICTURES FOCUS AID IN LIVE VIEW SHIFT FOCUS POINT FOR FOCUS AID1 AND EXPOSURE METERING2 1 2 REVIEW SWITCHING BETWEEN PICTURE MODE/REVIEW 45PM 22.02.2012 F2.8 Focus Aid is activated by turning the lens In combination with spot exposure metering MAGNIFY/REDUCE 12MP INFO 8234/9999 1/8000 ISO 12500 EV 999-9000 INFO 22:45PM 22.02.2012 SCROLL 12MP 8234/9999 DELETE/RATE F2.
MENU OVERVIEW Factory settings Available for FAVORITES FAVORITES 6 Lens Detection Drive Mode 6 6 6 Exp. Metering Exp.
TECHNICAL DATA Camera name Leica M10-P Camera type Digital camera with rangefinder system Type No. 3656 Order No. 20 021 (black), 20 022 (silber) Lens mount Leica M bayonet Compatible lenses Leica M lenses, Leica R lenses via adapter Sensor CMOS chip, active surface approx. 24 x 36 mm Storage media SD cards 1-2 GB / SDHC cards up to 32 GB / SDXC cards up to 2 TB Viewfinder Large, bright-line frame rangefinder and automatic parallax compensation LCD panel 3” TFT LCD, 1.
SAFETY REMARKS GENERAL INFORMATION • Do not use your camera in the immediate vicinity of devices with powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer monitors, video game consoles, cell phones, broadcasting equipment). Their electromagnetic fields can interfere with recordings. • Image recording may be affected if you place the camera on a television set or operate the camera in its vicinity or near a cell phone.
LENS • A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight. The camera must therefore be protected against extended exposure to direct sunlight. Using the lens cap and keeping the camera in the shade or ideally in its camera case will help prevent damage to the interior of the camera.
MEMORY CARDS • Never remove the memory card during a datasave or card reading process. The camera must not be switched off or be subjected to impact or vibrations while working. • Do not open the cover/remove the memory card or the battery while the status LED is lit, which indicates memory access. Data on the card may otherwise be destroyed and camera malfunctions may occur. • Do not drop or bend memory cards as this will cause damage and result in the loss of the stored data.
ns o ly thor- o the ce, er- FCC Caution: To assure continued compliance, follow the attached installation instructions FCC Caution: and use only shielded interface cables with coreinstallation when connecting to To assure continued compliance, follow theferrite attached instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly computer or party peripheral devices.
