Quick start Guide

MEMORY CARDS
• Never remove the memory card during a datasave or card reading process. The camera must not
be switched off or be subjected to impact or vibrations while working.
• Do not open the cover/remove the memory card or the battery while the status LED is lit, which
indicates memory access. Data on the card may otherwise be destroyed and camera malfunctions
may occur.
• Do not drop or bend memory cards as this will cause damage and result in the loss of the stored
data.
• Do not touch the connections on the reverse of the memory card and keep them clean and dry.
• Keep memory cards out of the reach of children. Swallowing a memory card may cause suffoca-
tion.
SENSOR
• Cosmic radiation (e.g. during flights) may cause pixel defects.
CARRY STRAP
• Carry straps are usually made of very robust material. You should therefore keep it out of the reach
of children. A carry strap is not a toy and poses a strangulation risk.
• Use the carry straps only for their intended purpose on a camera or on binoculars. Any other use
poses the risk of injury and may possibly result in damage to the carry strap and is therefore not
permitted.
• Carry straps should also not be used for cameras/binoculars during sports activities with a high
risk of getting entangled in the carry strap (e.g. mountain climbing and similar outdoor activities).
REGULATORY INFORMATION
Specific regional approvals for this device can be found in the camera menu.
▸ Select Camera Information in the main menu
▸ Select Regulatory Information in the submenu
Alternating current (AC)
Direct current (DC)
Class II devices (the product has a double-insulated design)
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
(Applies within the EU and for other European countries with active waste separation policies)
This device contains electric and/or electronic components which must not be disposed of in
general household waste! Instead, it should be disposed of at a recycling collection point provided by
your local authority. This service is free of charge. Any standard or rechargeable batteries used in this
device must be removed and disposed of separately in accordance with local regulations.
Please contact your local authorities, waste disposal collection point or the retailer, from whom you
purchased the device for more information on correct waste disposal.
FCC Caution:
To assure continued compliance, follow the attached installation instructions
and use only shielded interface cables with ferrite core when connecting to
computer or peripheral devices. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s author-
ity to operate this equipment.
Declaration of Conformity
Trade Name: LEICA
Model No.: 3656
Responsible party/
Support contact: Leica Camera Inc.
1 Pearl Count, Unit A
Allendale, New Jersey 07401
Tel.: [phone]
Fax: [phone]
[e-mail]
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
3656
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
Contains FCC ID: N5A3656
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines. This equipment is tested for specific
absorption ratio (SAR) and complies with FCC/IC radiation exposure limits set
forth for an uncontrolled environment. This device complies with FCC/IC SAR
limit of 1.6 W/kg. For body worn operation, this equipment has been tested
and meets the FCC/ IC RF exposure guidelines when used with the Leica
Camera AG accessories
supplied or designated for this product that have no metallic component in the
assembly. Use of other accessories may not ensure compliance with FCC/IC
RF exposure guidelines.
For Canada only:
CAN ICES-3 (B)/NMB-3(B)
This device complies with RSS-210 of the IC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment is tested for specific absorption
ratio (SAR) and complies with FCC/IC radiation exposure limits set
forth for an uncontrolled environment. This device complies with FCC/
IC SAR limit of 1.6 W/kg. For body worn operation, this equipment has
been tested and meets the FCC/IC RF exposure guidelines when used
with the Leica Camera AG accessories supplied or designated for this
product that have no metallic component in the assembly. Use of other
accessories may not ensure compliance with FCC/IC RF exposure
guidelines.