User Manual

EN
10
Safety Remarks
CHARGER
Using the charger in the vicinity of broadcasting receivers may
interfere with the reception of the device. Ensure a distance of
at least 1 m (3 ft) between the charger and the receiver.
When the charger is in use, it may emit a buzzing sound – this is
normal and not a malfunction.
Disconnect the charger from the mains when it is not in use,
because it consumes some (a very small amount) electricity,
even when no battery is inserted.
Always keep the charger contacts clean, and never short circuit
them.
The car charging cable supplied must only be operated in 12V
in-car grids and must never be connected while the charger is
connected to mains electricity.
MEMORY CARD
Never remove the memory card during a datasave or card
reading process. The camera must not be switched off or be
subjected to impact or vibrations while working.
Do not open the cover/remove the memory card or the battery
while the status LED is lit, which indicates memory access. Data
on the card may otherwise be destroyed and camera malfunc-
tions may occur.
Do not drop or bend memory cards as this will cause damage
and result in the loss of the stored data.
Do not touch the connections on the reverse of the memory
card and keep them clean and dry.
Keep memory cards out of the reach of children. Swallowing a
memory card may cause suffocation.
SENSOR
Cosmic radiation (e.g. during flights) may cause pixel defects.