User Manual

EN
106
FAQ
FAQ
CAMERA
Messages:
Battery too low for sensor cleaning
Please stop sensor cleaning immediately
Does the battery have a sufficient charge?
Use a charged battery.
The battery is flat.
Replace the battery.
The camera won’t switch on.
Is the battery inserted correctly?
Does the battery have a sufficient charge?
Use a charged battery.
Is the bottom cover inserted correctly?
Is there visible condensation?
This may occur when the camera is moved directly from a cold environment into heat. Wait
for the camera to acclimatize and the condensation will disappear.
The date and time display is incorrect or not
shown.
The camera hasn’t been in use for an extended period of time and no battery was inserted.
Insert a fully charged battery.
Set the date and time.
RECHARGEABLE BATTERY/CHARGER
The camera switches off again immediately after it
is switched on.
Does the battery have a sufficient charge for camera operation?
Charge the battery or insert a charged battery.
DISPLAY