User Manual

EN
61
Picture mode
WHEN INTERMEDIATE VALUES OR HIGHER VALUES THAN
ISO6400 ARE TO BE SET
▸ Select ISO Settings in the main menu
▸ Select M-ISO in the submenu
▸ Select the desired value
TO RESTRICT THE AUTOMATIC SETTING RANGE
▸ Select ISO Settings in the main menu
▸ Select Maximum Auto ISO, or Maximum Exposure Time in the sub-menu
▸ Select the desired value
You define the area within which the automatic setting should be
applied in the submenu Maximum Auto ISO, where you select the
highest sensitivity value.
You can allow the camera to ensure blur-safe exposure times in the
submenu Maximum Exposure Time – by choosing one of the three focal
length-specific settings 1/f, 1/[2f], 1/[4f]
1
or you can specify the
greatest focal length manually between 1/2s and 1/500s. In the focal
length-specific settings, the camera will only switch to a higher
sensitivity if the shutter speed would fall below the set threshold
due to low light; for example with a 50mm lens at speeds slower
than 1⁄60s at 1/f, 1⁄125s at 1/[2f] or 1⁄250s at 1/[4f].
1
This function requires the use of encoded lenses or the setting of the lens type
used in the menu.