User Manual

EN
71
Picture mode
A
B
C
E
D
A Number of pictures
B Exposure difference between the pictures
C Exposure compensation setting
D Light value scale
E Red highlighted exposure values for pictures (the scale will be
offset by the relevant value if exposure compensation is set
concurrently.)
Notes
• The following rule applies when using automatic bracketing: With
automatic ISO sensitivity control (see S. 60) enabled, the
sensitivity calculated by the camera automatically for the raw
picture will also be applied to all other pictures in a series, i.e.
the ISO value will not change during bracketing. This may mean
that the slowest shutter speed specified under Maximum Exposure
Time is exceeded.
• The focus range for automatic bracketing may be limited
(depending on the originally set shutter speed). The specified
numbers of pictures will be taken regardless. Several pictures in
a series may consequently be taken with the same exposure
values.
• The function remains active until another function is selected in
the Drive Mode submenu, or the camera is switched off and on
again. If no other function is selected, another series of pictures
is taken each time the shutter button is pressed.