User Manual

EN
74
Picture mode
GRID LINES
The grid divides the image frame into nine equal fields. It helps with
e.g. picture composition and camera orientation. You can choose
one of two grid displays. They divide the frame into 3x3 or 6x4
fields.
▸ Select Capture Assistants in the main menu
▸ Select Grids in the submenu
▸ Select the desired grid type (3x3, 6x4) or deactivate the function
(Off)
CLIPPING
The Clipping display marks bright or dark areas in the image
lacking definition (bright areas flash in red; dark areas flash in
blue). To adjust these displays to specific conditions or your
compositional ideas, you can specify limit values, i.e. the level of
over/underexposure at which they appear. The Clipping display
therefore offers a very simple and exact means for checking and
adjusting your exposure settings.
▸ Select Capture Assistants in the main menu
▸ Select Exposure Clipping in the submenu
▸ Activate the function (On) or deactivate it (Off) in the sumenu
Clipping Enabled
• The two other lines are not selectable (= gray) when the
function is deactivated.
▸ Optional: Set the desired lower and upper threshold values in
the Lower threshold value and Upper threshold value lines.
Note
The clipping display always refers to the currently displayed
cropped section.