User Manual

Picture mode

Notes

• A running series of pictures can only be aborted by switching oﬀ

the camera. The relevant settings remain unchanged, which

means that tapping the shutter button again after switching the

camera on will restart the series.

• Live View can only be used for a short period of time with

interval shooting: It is switched oﬀ again after each individual

picture. The camera may switch oﬀ and on again if “Auto power

oﬀ” is set and no other camera operation occurs between the

individual shots.

• Interval shooting over an extended period of time in a cold

location or in a place with high temperature and humidity may

result in malfunctions.

• Interval shooting will be interrupted or canceled in the following

situations:

– if the battery is depleted

– if the camera is switched oﬀ

Make sure to use a suﬃciently charged battery.

• Interrupted or canceled interval shooting an be resumed by

switching the camera oﬀ, replacing the battery or memory card

as needed and then switching the camera back on. The pictures

taken after function interruption will be stored in a separate

group.

• The interval function remains active after a picture series is

completed, and also after the camera is switched oﬀ and on

again. You will have to change functions in the Drive Mode

submenu if you want to exit the mode. A prompt will be

displayed on screen if the camera is switched oﬀ and on again

while the Interval shooting function is active.

• The availability of this function does not mean that the camera is

suitable for use as a monitoring device.

• The pictures of an interval shoot are marked ??? in review mode.

• Regardless of how many pictures were taken in a series, the last

picture in the series or the last picture in the series or the last

picture saved on the memory card while the saving process is

ongoing will be displayed ﬁrst i both review modes.