Leica Geosystems Original Accessories Material matters Original Accessories Catalogue 2017 leica-geosystems.
Copyright: Joseph S. Martin/ARTOTHEK Unhappy with copies? There is only one original! Benefit from the quality, precision and reliability of Leica Geosystems Original Accessories – perfectly suited for Leica Geosystems measuring equipment. You’ll recognise Original Leica Geosystems Accessories by the security label with its unique code and colour-shifting logo, found on either the packaging or additional leaflet. The genuineness of your accessory can be verified by entering the security code at www.
Verify the genuineness for your safety and benefit Leica Geosystems Original Accessories now come with unique security codes that guarantee that what you bought is truly a part of the Leica Geosystems complete solution. No other accessories compare to those developed and produced by Leica Geosystems. Experience the optimal performance of your Leica Geosystems measuring equipment using truly integrated accessories for optimised performance.
To be precise: Every detail counts As far as the eye could see, there was nothing. Then came the survey professionals. Today an entire city district stands where earlier fields and meadows were. Measurement experts work as pioneers for the realisation of the visions and plans of others. The results of their work are essential. Their meaning lies in the truth upon which the others trust. It is with this consciousness that Leica Geosystems designs its instruments.
Valuable accessories for valuable results The term “quality” is quickly and easily said, as long as one is not talking about concrete results. But it is only results that count: for the professional user, the measurement result. For Leica Geosystems, the satisfied customer. And that is over years and decades. The quality of the original For about 90 years, Leica Geosystems has given the term “quality” concrete substance.
Transparent choice for your individual requirements All our customers are experts in their fields. All have the need for professio nal accessories of outstanding quality. Many of them quite simply want “the best”, and therefore the accessories of the “Professional 5000 Series”. Based on their daily work and requirements, some make the products of the “Professional 3000 or 1000 Series” their choice. Whatever the case may be, it is a decision for quality.
Three Original Accessory series for your benefit Quality always remains quality. But not every user needs extremely low measurement tolerances or works under extraordinary climatic conditions. That is why Leica Geosystems offers its original accessories in three series for differing requirements. There is a lower limit, through which quality is defined. There is, however, no upper limit, because our customers’ demand for maximum performance rises continually.
Original tripods for stability The most important criterion for a good tripod is its stability, quite explicitly, the torsional rigidity. With that, a very valuable, but not the only, argument for the original tripod from Leica Geosystems has been named. Other substantial benefits are the height stability under load and the minimal horizontal drift.
Transparent choice The best tripod for your requirements Leica Geosystems offers you a large selection of high-value tripods for all survey instruments and applications. The right tripod choice is decisive if the indicated accuracy of an instrument is to be reached. The classification “heavy duty” and “light duty” is widely based on ISO Norm 12858-2. They differ through the stability requirements and instrument weight.
Original tribrachs Accuracy through torsional rigidity Similarly to the stability of the tripod, that of the tribrach is a significant factor in measurement accuracy. The torsional rigidity, the most important criterion of a tribrach, is constantly controlled and tested during its production. The maintenance-free foot screws of the Leica Geosystems tribrach provide movement that is always smooth and free of play, even after years of use.
Transparent choice The ideal tribrach for your application All original tribrachs comply with the strict specifications and quality standards of Leica Geosystems. Your choice should ideally be made according to your individual accuracy requirements. PROFESSIONAL 5000 GDF321 GDF322 The hysteresis of the Professional 5000 Series tribrachs is guaranteed to a maximum of 1" (0.3 mgon) or better.
Original prisms Maximum accuracy and range The range of a prism results from, among other things, its coating and the glass geometry. A number of original prisms from Leica Geosystems have a special coating on the reflective surfaces – the anti-reflex coating, and a copper coating on the reverse side. Without the copper coating, the range of distance measuring, ATR and PowerSearch would be reduced by up to 30 %. The workmanship and the durability of the copper coating are decisive for a long life.
Transparent choice The optimal prism for your application Leica Geosystems offers a transparent selection of prisms in various sizes for different areas of application. PROFESSIONAL 5000 PROFESSIONAL 3000 HIGHEST ACCURACY The prisms distinguish themselves through a centring accuracy of under 1 mm and the best possible beam deviation of < 2" to achieve the maximum range. Standard reflectors For the most common applications.
Original data communication Secure data storage and transfer Losing data after a work-filled day is frustrating and expensive. The electronic accessories from Leica Geosystems comply with a higher standard than the commercially available accessories that meet consumer or even industry standards. The storage media and other data transfer products from Leica Geosystems are qualitatively of extremely high value and r eliability.
Storage media Leica Geosystems storage media are perfectly matched to Leica Geosystems instruments and sensors. Compared to conventional devices on the market, that read or write single data, these instruments have a different functional principle. The TPS or GNSS instruments create a database on the memory card and switch constantly between different open files. Standard memory cards are unable to manage this required multi-tasking function.
Original batteries and chargers For reliable instrument function At first glance, chargers and batteries do not seem to be important accessories. Perhaps they do not seem worth paying attention to for quality or origin. Experience shows the opposite. Instruments and their electronics react sensitively and need a reliable power supply in all environmental conditions.
Transparent choice Perfect batteries and chargers Leica Geosystems offers you a wide range of high-value chargers and batteries. For chargers, you have the choice between the Professional 5000 Series with high functionality and intelligence and the Professional 3000 and 1000 Series, the cost-effective alternatives with less function, but outstanding quality and security.
Leica Geosystems Original Accessories Contents Tripods 20 Tribrachs 22 Carriers 23 Standard reflectors 24 Special reflectors 25 Mini reflectors 26 Containers & bags 27 Reflector poles 30 GNSS poles 31 Accessories for reflector poles 32 LS/DNA levelling staffs 34 Data storage 35 Radio accessories 36 Eyepieces 38 Chargers 39 Batteries 40 Cables 42 19
Tripods PROFESSIONAL 5000 GST20, Wooden tripod Heavy duty tripod with plumb bob, carrying strap and side clamp screws. Proven long-life, twist-proof and excellent vibration characteristics. Packaged length 110 cm (3.61 ft), extendible to 180 cm (5.91 ft), weight 6.4 kg (14.1 lb). Order No: 296632 GST120-9, Wooden tripod Heavy duty self-closing tripod with carrying strap and side clamp screws. Proven long-life, twist-proof and excellent vibration characteristics. Packaged length 110 cm (3.
PROFESSIONAL 3000 PROFESSIONAL 1000 ACCESSORIES FOR TRIPODS GST4, Tripod star For the secure set-up of tripods on slippery surfaces. Order No: 332200 GST05, Wooden tripod Light duty tripod with water-tight plastic wrap for complete protection. Suitable for TPS instruments with angular measurement accuracy starting from 5”, reflectors and GNSS antennas. Packaged length 107 cm (3.51 ft), extendible to 176 cm (5.77 ft), weight 5.6 kg (12.3 lb).
Tribrachs PROFESSIONAL 5000 PROFESSIONAL 3000 PROFESSIONAL 1000 GDF321, Tribrach without plummet High accuracy, maintenance free tribrach. Individually tested. Suitable for all high angular accuracy requirements. Torsional stiffness < 1", weight 760 grams (1.72 lb). Order No: 777508 GDF311, Tribrach without plummet Suitable for TPS instruments with an angular accuracy of greater than 3". The footscrews have a large diameter which permits fine adjustment even when wearing work gloves.
Carriers PROFESSIONAL 3000 PROFESSIONAL 5000 SNLL121, Precision carrier with laser plummet The laser provides convenient setting up even in conditions of poor visibility. Supplied with 4 x AA-size alkaline batteries. Reflector centring accuracy 0.3 mm, plummet accuracy 1.0 mm at 1.5 m. Order No: 667316 GRT144, Carrier with stub Simple carrier for use in tribrachs with optical plummet. Suitable for reflectors with stub fitting. Reflector centring accuracy 1.0 mm.
Standard reflectors PROFESSIONAL 5000 PROFESSIONAL 3000 GPR121, Circular prism with holder Precision circular prism with antireflex coating, mounted in metal holder. Supplied with removable target plate. Centring accuracy 1.0 mm, range 3,500 m (11,500 ft). Order No: 641617 GPR111, Circular prism with holder Circular prism, sealed in red polymer holder. Large integrated target plate provides good visibility. Centring accuracy 2.
Special reflectors PROFESSIONAL 5000 GPH1P, Precision prism Precisely machined reflector, for high accuracy requirements. The prism diopter is slightly tilted to prevent any EDM reflection from the front surface, thereby increasing measurement accuracy. Centring accuracy 0.3 mm, range 3,500 m (11,500 ft). Order No: 555631 PROFESSIONAL 3000 GPR112, Monitoring prism Large diameter monitoring prism for long range measurements. For installation on M8 or 5/8" threaded bolts.
Mini reflectors PROFESSIONAL 5000 GMP101, Mini prism set Mini prism mounted in metal holder. Includes a circular bubble, removable target plate, spike and padded bag. Prism constant of +17.5 mm, centring accuracy 1.0 mm, range 2,000 m (6,600 ft). Order No: 641662 PROFESSIONAL 3000 GMP111, Mini prism with holder Mini prism mounted in polymer holder with 1/4" thread fittings. Includes circular bubble, GLS115 four-section pole and point. Prism constant of +17.5 mm, range 2,000 m (6,600 ft).
Containers & bags HARD-TOP CASES Sample picture GVP609, Container for accessory For 2 reflectors (GPR121, GPR111, GPH1 with GPR1, GRZ4 or GPH1P), 2 carriers (GZR3, SNLL121, GZR103 or GRT144), 2 tribrachs (all types), GZT4 target plate and GHM007 height meter. Order No: 667451 GVP721, Container for base & rover Hard container for 2 SmartAntennas, CS field controller / tablet and accessories for a base and rover setup.
Containers & bags BACKPACKS, BAGS GVP643, Soft bag for CS10 field controller Soft bag for CS10 field controller for transportation and protection against dirt. Including belt loop. Order No: 767904 GVP703, Soft bag Padded bag for accessories, controller, radios or CS25 tablet. Order No: 790314 GVP644, Soft bag for CS15 field controller Soft bag for CS15 field controller for transportation and protection against dirt. Including belt loop.
ACCESSORIES FOR CONTAINERS GVP716, Backpack carrying system Easy-to-mount backpack system for carrying all large TPS and GNSS container including TS/MS60 containers. Order No: 833516 GVP717, Sidebag for containers Can be mounted to GVP721/722/723/725 containers. To hold additional accessories, CS35 tablet, laptop or documents. Order No: 833517 GVP718, Basic carrying system Fits to GVP721/722/723/725 containers.
Reflector poles PROFESSIONAL 5000 GLS12 GLS12F PROFESSIONAL 3000 GLS11 GLS111 GLS112 GLS12, Telescopic pole Pole with snap locks to prevent any pole slip. Suitable for the GRZ122 reflector together with GNSS antenna. Graduated in cm, min. length 1.39 m, extendible to 2.0 m, weight 950 grams. Order No: 754391 GLS11, Telescopic pole Reflector pole with quick release clamp for easy and rapid height adjustment. Graduated in cm and ft, min. length 1.24 m (4.07 ft), extendible to 2.15 m (7.
GNSS poles PROFESSIONAL 5000 PROFESSIONAL 3000 ACCESSORIES FOR EXT. ANTENNAS GAD108, Arm for UHF / GSM antenna to GS15 Arm to mount external UHF/ GSM antenna to GS15 SmartAntenna, useful in areas of poor radio or cellphone network receiption. Gainflex UHF/GSM antenna fits on arm. Order No: 767790 GLS30GLS30 GLS31 GLS31 GLS12 GLS13 GLS30, Telescopic carbon fibre GNSS pole Carbon fibre pole with snap lock at 2.00 m (6.56 ft) and 1.80 m (5.91 ft) for rapid setup. Min. length 1.36 m (4.
Accessories for reflector poles ACCESSORIES FOR REFLECTOR POLES AND GNSS POLES GHT63, Poleclamp for field controller holder Poleclamp to attach a holder GHT62, GHT66 or GHT78 to every telescopic pole. Order No: 767880 GHT36, Base for telescopic rod on tripod Base with 5/8 " screw, for setting up telescopic rod on tripod. Order No: 667236 GHT64, Holder for GFU or GSM modems Holds GFU or GSM modems with strong hook and loop fastener. Mountable on all GNSS poles.
ACCESSORIES FOR REFLECTOR POLES AND GNSS POLES GSR2, Dual strut support With 2 telescopic legs, for rapid setup of ∅ 25 mm poles. Order No: 555720 GSR111, Dual strut support With 2 telescopic legs, for rapid setup. Suitable for poles of all diameters. Order No: 667319 GST6, Quickstand With 3 telescopic legs, provides an extremely stable support for ∅ 25 mm poles. Order No: 560138 GZW12, TPS pole extension Extends all poles with stub fitting, by 1.00 m (3.28 ft).
LS/DNA levelling staffs PROFESSIONAL 5000 GPCL2 PROFESSIONAL 3000 GPCL3 GPCL2, Invar staff with bar code Precision levelling staff with 2 circular bubbles. The two attached handles provide steady positioning. Length 2.0 m (5.56 ft), weight 4.2 kg (9.3 lb). Order No: 563659 GPCL3, Invar staff with bar code Precision levelling staff with 2 circular bubbles. The two attached handles provide steady positioning. Length 3.0 m (9.84 ft), weight 4.9 kg (10.8 lb).
Data storage MEMORY CARDS AND CARD READERS MSD1000, Industrial grade SD memory card 1 GB Secure digital memory card. capacity 1 GB. These rugged industrial grade cards protect data even when dropped and in extreme environmental conditions. Order No: 767856 MSD08, Industrial grade SD memory card 8 GB Secure digital memory card. Capacity 8 GB. These rugged industrial grade cards protect data even when dropped and in extreme environmental conditions.
Radio accessories ACCESSORIES FOR HPR RADIOS GST74, Antenna mast including tripod Aluminium tripod with a telescopic mast to extend the antenna height up to 5 m (16.5 ft). Includes a bag and suspension ropes with hooks. Order No: 806098 GVP712, Container for HPR high power radio Small black waterproof container. Holds a HPR radio and cables. Order No: 806097 GVP711, Soft bag for battery Soft bag which can hold a battery.
ACCESSORIES FOR LEICA FIELD CONTROLLER AND TOTALSTATION GDZ71, Stylus Stylus for CS20 field controller. Order No: 813914 GHT76, Tether Tether to clip on a GDZ71. Order No: 813582 GHT68, Utility hook for CS20 field controller Utility hook for attaching CS20 field controller to a tripod. Order No: 807245 GHT67, Hand strap for CS20 field controller Hand strap for CS20 field controller. Order No: 807158 GDZ76, Digitiser pen Digitiser pen for CS35 tablet. Order No: 851539 GHT77, Tether Tether for a GDZ76.
Eyepieces DIAGONAL EYEPIECES AND ANCILLARY LENSES GFZ4T, Diagonal eyepiece For comfortable observations of steep sights, up to the zenith. With thread connection. Fits only for Flexline plus TS02+. No counterweight needed. Order No: 793978 GFZ3, Diagonal eyepiece For comfortable observations of steep sights, up to the zenith. Fits all TPS instruments except TS02+. Includes objective counterweight. Order No: 793979 GOK6, Diagonal eyepiece For comfortable observations of steep sights, up to 66°.
Chargers PROFESSIONAL 5000 PROFESSIONAL 3000 PROFESSIONAL 1000 sample picture GKL341, Charging station Intelligent charging ensures long battery life. Possible to charge up to 4 batteries simultaneously. GEB211/212/221/222/ 241/242/331. Includes country specific mains connection. Order No: 799187 GKL311, Battery charger Easy-to-use, low cost charger for GEB211/212/221/222/241/242/331 Li-Ion batteries. Includes car adapter cable.
Batteries INTERNAL BATTERIES GEB242, Li-Ion battery High output battery for TS60/MS60 and TM50 instruments, 14.8 V / 5.8 Ah. Order No: 793975 GEB222, Li-Ion battery High output battery with extended capacity for all TS11/12/15/16 and Flexline instruments, GS10 GNSS receiver and Piper 100/200, 7.4 V / 6.0 Ah. Order No: 793973 GEB221, Li-Ion battery High output battery for all TS11/12/15/16 and Flexline instruments, GS10 GNSS receiver and Piper 100/200, 7.4 V / 4.4 Ah.
EXTERNAL POWER SUPPLY GEB371, External Li-Ion battery High output battery for set-ups over long periods, 13 V / 250 Wh. Requires GEV242 for charging. With a GEV277 cable the battery can be used as UPS (uninterruptible power supply). Weight 2.3kg. Order No: 818916 GEV270, Power supply Mains adapter for uninterruptible power supply. Connects to all Leica Geosystems power cables. Country specific mains cable included. AC input 100 V – 240 V.
Cables DEVICE INSTRUMENT ART. SIGN DESCRIPTION GEB371 or GEV270 TS02/06/09/11/12/15/16, LS GS10/25 TM50/TS/MS60, Any GS, CS10*/15*/20 GS10/25, GR10/25 CS10/15/20, GS08plus/12/14/15 GS08plus/12/15 GS14 TM50/TS/MS60 409678 560130 758469 733298 756365 748418 796492 793364 GEV52 GEV97 GEV219 GEV172 GEV215 GEV205 GEV264 GEV261 Power cable, 1.8 m, connects instrument to external battery Power cable, 1.8 m, connects instrument to external battery Power cable, 1.
Cables DEVICE INSTRUMENT ART. SIGN TCPS TM50/TS/MS60 TS11/12/15/16 771057 GEV236 734697 GEV186 Y-cable, 1.8 m, connects instrument to TCPS and battery Y-cable, 1.8 m, connects instrument to TCPS and battery Satelline 3AS w/o housing GS10/15/25 639968 GEV125 Data transfer cable, 1.
Accessories overview TRIPODS TPS 1" 2" 3" 5" Motorised TPS setup or traversing with forced centring 7" GST20 GST20-9 GST120-9 GST20 GST20-9 GST120-9 GST20 GST20-9 GST120-9 GST101 Manual TPS setup or traversing with forced centring GST20 GST20-9 GST120-9 GST20 GST20-9 GST120-9 GST20 GST20-9 GST120-9 GST05 GST101 GST05 GST101 Prism setups on control points GST101 GST101 GST101 GST05 GST05L GST05L GST103 GNSS Static GST05 Kinematic GST05L Levels LS GST40 GST20 GST20-9 GST120-9 Autom
Perfect compatibility of the accessories Leica Geosystems instruments and Leica Geosystems accessories are perfectly aligned to each other and constitute a finely tuned package. In order to achieve the individually required accuracy, it is always necessary to consider the accuracy of the instrument and accessory system as a whole. Transparent choice for your individual requirements On the table overleaf you will find an overview of Leica Geosystems instruments and the accessories recommended for them.
Leica Geosystems – when it has to be right Revolutionising the world of measurement and survey for nearly 200 years, Leica Geosystems is the industry leader in measurement and information technologies. We create complete solutions for professionals across the planet.
