Item Brochure

1
2
3
4
d
h
5
6
a b b
a a a
Trapezium measurements
Using the trapezium function, you can quickly and reliably
determine e.g. roof slopes and facade areas. You need only
two measurements. The integrated tilt sensor determines
the tilt at the same time.
Height profile measurements
Target the device on a known reference mark and then
measure the height differences of other points relative to
this. If the measured points are taken all in one direction
the profile of the ground can be determined from the meas-
ured horizontal distances and the height differences.
Pythagoras functions
Using the tripod, you can measure distances indirectly,
horizontally and vertically. The Leica DISTO™ calculates the
result automatically for you from three measurements.
Functions such as automatic minimum and maximum meas-
urements help you to measure the right point.
Partial heights, e.g. balcony or window heights, are deter-
mined by Pythagoras.
Stake-out function
One or two different distances (a and b) can be entered
into the device and then used to subtract from defined
measured lengths. The display always shows the current
stake-out distance and a direction arrow. At a distance of
0.1 m to the next stake-out point, an acoustic signal sounds.
aa
ab
Still more measurement possibilities
Special functions
20