Item Brochure

.dxf

The world’s ﬁrst

Measure point data and create plans

Point-to-Point measurement

Fold out the Smart Base on the Leica DISTO™ S910 and

position the instrument on a stable surface. After targeting

and measuring the start and end points of the distance

to be measured the required result appears on the display.

If the instrument has been levelled, it determines the height

difference, the horizontal distance and the inclination of

the measured line. Using this function, it is very easy to

measure lengths or widths on a roof, for example.

Smart area measurement

Determine the area and the perimeter of horizontal, verti-

cal and even inclined areas from one point. This is done by

positioning the folded out Smart Base on a stable surface

and targeting the corner points of the area to be measured,

in either a clockwise or anticlockwise direction. Using this

method, you can quickly and easily measure complex ﬂoor,

wall, ceiling or inclined roof areas.

Data capture in DXF files

After levelling the Leica DISTO™ S910 with the folded out

Smart Base, you can measure points and save them in a

DXF ﬁle. The ﬁles are then available for you to download by

USB. The 2D DXF ﬁles present ﬂoor plans or wall layouts;

the 3D DXF ﬁles provide you with the measured points in

3D for further processing. As long as the Pointﬁnder was

switched on, you will also be able to download the pictures

of the measured points.

Point data transfer

Using the WLAN interface and the Smart Base, you can

transfer any number of points in real-time to a portable

computer. Leica DISTO™ transfer with Plugin also supports

data transfer into AutoCAD

and BricsCAD

. The data can

also be transferred into other third-party software. In

these cases, you can make direct use of the full range of

functions of your preferred software. This function is ideal

for checking existing datasets or preparing new drawings

of existing buildings.