Target Plate TPD 100 The aiming support for DISTO™ Digital Pointfinder 1st June 2017, Markus Hammerer
The challange You need to measure to a land mark? You need to measure over a long distance to a fixed position? You need to measure in bright light condition (sunlight)? 2
The solution Leica TPD 100 3
The solution Leica TPD 100 Pattern on target plate enables to align to the center of the target plate even over longer distances of up to 100m! 4
Application E.g.
Application E.g. Land Surveying for Gardening and Landscaping All measured points are referenced to the 1st point (0/0/0).
Application E.g. Architecture For the construction of an object the elevation profile of a land area must be captured. Use the height profile function of your Leica DISTO™ D510 and D810 touch or the dxf-data capture function of your Leica DISTO™ S910. For the profile function all measurements must be aligned, for the dxf-data capture function the profile can be measured from any point. The first measured point defines the reference height so no influence of target or instrument height either).
Application E.g. Land Surveying for Gardening and Landscaping 4.27m 2.98m 3.11m 2.38m 1.23m 0.15m 0.11m 6.33m 9.42m 12.26m 15.29m 18.88m 21.67m 24.