User's Manual
Table Of Contents
- Congratulations!
- Safety and Use
- Leica EZ4, Leica EZ4 E or Leica EZ4 W
- Eyepieces (Only for Leica EZ4)
- Photography Using the Leica EZ4 E or Leica EZ4 W
- Get Set!
- USB Mode – Capturing and Adjusting Images Using a Computer
- SD Mode – Capturing Images Without a Computer or Without a Wireless Device
- Adjusting Settings While in SD Mode
- WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only Available for Leica EZ4 W)
- Ethernet Mode – Capturing and Adjusting Images Using a Network
- The Camera Remote Control (Optional)
- Care, Transport, Contact Persons
- Specifications
- Dimensions
Leica E Series User Manual Safety and Use 12
Intended use
The E Series microscopes are optical instru-
ments for improving the visibility of objects
through magnication and illumination. It is
used for observing and documenting.
Place of use
Use the instrument in enclosed, dust-free
rooms at +10°C to +40 °C only. Protect it from
oil, chemicals and extreme humidity. It must
be at least 10 cm from the wall and away from
ammable substances.
Interference
Avoid large temperature uctuations, direct
sunlight and vibrations. These conditions
can distort measurements and micrographic
images.
In warm and warm-damp climatic zones,
the individual components require
special care in order to prevent the build-up of
fungus.
Use in clean rooms
Leica E Series microscopes can be used in clean
rooms without any problems.
Handling electrical components
Never install any other plug (NEMA
5-15P) or unscrew any mechanical
components unless expressly instructed to do
so in the instructions.
The microscope must be connected to a
grounded outlet.
Always position the microscope so that
you can disconnect it from the power
supply at any time. The power cable is provided
as the power disconnect device.
Instructions for Use